Cisco IP Contact Center Express Specialist – CCNA training CCIE training

642-145 Implementing Cisco IOS Unified Communications Part 2 (IIUC2)

Posted on April 23, 2013 by Lindsay Posted in Cisco Leave a comment

QUESTION 1
What is the best practice of configuring an intercom on a shared line?

A. This feature allows all endpoints to participate in intercom messages.
B. This feature can be used only when the intercomephone-dn is configured as a dual line
C. This feature is not supported and should not be used
D. This feature can be supported only in a unidirectional manner.
E. This feature allows one endpoint to contact multiple endpoints simultaneously

Answer: C

Explanation:

QUESTION 2
Using the show ccn trigger command provides the following output:cue-10-0-0# show ccn trigger
Name: 6800Type: SIPApplication: voicemailLocale:en_US Idle Timeout: 5000Enabled: yes
Maximum number of sessions: 8Name: 6700Type: SIPApplication: autoattendant Locale:en_US
Idle Timeout: 5000Enabled: yes Maximum number of sessions: 8cue-10-0-0# What two pieces of
information can you derive from this output? (Choose two.)

A. The number of ports available is 16
B. The operator can bereachedat extension6800
C. The voice-mail pilot point number is 6800
D. The voice-mail application is enabled.
E. The idle timeout is 5 seconds

Answer: C,D

Explanation:

QUESTION 3
Refer to the exhibit. What type of calls can the ephone with extension 2151 make?

A. No impact on out going calls. However, in coming calls will not be permitted to extension
2151unless cor list is configured on the ephone-dn
B. Only US calls
C. All calls
D. Internal and emergency calls only, because of the defaultcor restriction.
E. None

Answer: C

Explanation:

QUESTION 4
Refer to the exhibit. A user at Acme Co. reports that when someone leaves a voicemail message,
their MWI does not light up. The administrator has checked the MWI configuration in Cisco Unified
Communications Manager Express and found that the MWI On number is 9001 and the MWI Off
number is 9000. Using the trace output from the Cisco Unity Express module, what is the
problem?

A. The MWI On number configuration is incorrect in Cisco Unity Express
B. The CCN subsystem SIP is incorrect in Cisco Unity Express.
C. The MWI Off Number configuration is incorrect in Cisco Unity Express
D. The SIP is misconfigured in Cisco Unified Communications Manager Express
E. The MWI application is not enabled

Answer: A

Explanation:

Best CCNA Training and CCNA Certification and more Cisco exams log in to examkingdom.com

642-164 Q&A / Study Guide / Testing Engine

Posted on March 16, 2012 by Lindsay Posted in Tech

Best IBM Certification Training and IBM Exams Training
and more IBM exams log in to Certkingdom.com

QUESTION 1
A customer has an Exchange server on a Windows 2003 and would like to perform daily backups.
It is required that the Exchange server is always available. What is the best solution to achieve this?

A. UseNTbackup for Exchange Services.
B. Useonly offline backups that uses Logical Volume Snapshot Agent.
C. Use IBM Tivoli Storage Manager (Tivoli Storage Manager) for Mail for online backups daily.
D. Use Tivoli Storage Managerclient without stopping the Exchange server.

Answer: C

QUESTION 2
A customer requires a large file server backup in the least time possible by using a storage area
network (SAN) environment. Which component should be installed on the file server in order to
achieve this?

A. Tivoli Management Console
B. Integrated Solution Console
C. IBM Tivoli Storage Manager SAN-Free
D. IBM Tivoli Storage Manager for Storage Area Network

Answer: D

QUESTION 3
A new storage pool is to be defined for providing off-site data protection by using an existing tape
library at the off-site location and needs to provide optimized restore performance in the case of
disaster. How should the storage pool be optimally configured?

A. an active-data copy pool that uses a tape device class
B. a copy pool that uses a file device class with node collocation
C. a copy pool that uses a tape device class with group collocation
D. an active-data copy pool that uses a file device class with node collocation

Answer: C

QUESTION 4
Which type of device class should be defined in order to use the SnapLock feature in IBM Tivoli
Storage Manager server?

A. DLT device class
B. LTO device class
C. FILE device class
D. DISK device class

Answer: C

QUESTION 5
In a server to server communication (or in enterprise configuration), after defining a target IBM
Tivoli Storage Manager (Tivoli Storage Manager) server on the Tivoli Storage
Manager source server, how can an administrator test that the details entered are correct?

A. Check the Tivoli Storage Managerserver activity log.
B. Ping the server from the operating system command line.
C. Use the Ping Server Tivoli Storage Manager command.
D. Open the Tivoli Storage Manager client on the Tivoli Storage Manager server, and see if the
client can access the defined Tivoli Storage Manager server.

Answer: C

Best IBM Certification Training and IBM Exams Training
and more IBM exams log in to Certkingdom.com

642-162 Q&A / Study Guide / Testing Engine

Posted on March 14, 2012 by Lindsay Posted in Cisco, Tech

Best CCNA Training and CCNA Certification
and more Cisco exams log in to Certkingdom.com

QUESTION 1
Which two items does the Cisco CRS 4.5 Installer always install on the system? (Choose two.)

A. Cisco UnifiedCallManager
B. Java plug-in
C. Cisco UnifiedCallManager BARS Utility
D. SQL 2K Server

Answer: B,C

QUESTION 2
What are the components of the JTAPI Subsystem? (Choose three.)

A. call control groups
B. RM provider
C. trigger
D. CTI ports
E. provider
F. CMT Dialog Control Group

Answer: A,C,E

QUESTION 3
When a valid SQL Query in a DB Read step returns 0 rows, which branch of the step will be
executed?

A. SQL Error
B. Connection Not Available
C. Timeout
D. Successful

Answer: D

QUESTION 4
Which two steps check out a database connection from the connection pool? (Choose two.)

A. DB Get
B. DB Release
C. DB Write
D. DB Read

Answer: C,D

QUESTION 5
Which three Cisco CRS upgrade paths are supported? (Choose three.)

A. Cisco CRS 2.2 to Cisco CRS 3.5
B. Cisco CRS 3.1 to Cisco CRS 4.0
C. Cisco CRS 2.2 to Cisco CRS 4.0
D. Cisco CRS 4.0 to Cisco CRS 4.5
E. Cisco CRS 4.0 to Cisco CRS 3.0
F. Cisco CRS 3.5 to Cisco CRS 4.0

Answer: A,B,F

Best CCNA Training and CCNA Certification
and more Cisco exams log in to Certkingdom.com

642-145 Q&A / Study Guide / Testing Engine

Posted on March 13, 2012 by Lindsay Posted in Cisco, Tech

Best CCNA Training and CCNA Certification and more
Cisco exams log in to Certkingdom.com

QUESTION 1
What is the best practice of configuring an intercom on a shared line?

A. This feature allows all endpoints to participate in intercom messages.
B. This feature can be used only when the intercomephonedn is configured as a dual line
C. This feature is not supported and should not be used
D. This feature can be supported only in a unidirectional manner.
E. This feature allows one endpoint to contact multiple endpoints simultaneously

Answer: C

QUESTION 2
Using the show ccn trigger command provides the following output:cue1000#
show ccn trigger
Name: 6800Type: SIPApplication: voicemailLocale:en_US Idle Timeout: 5000Enabled: yes
Maximum number of sessions: 8Name: 6700Type: SIPApplication: autoattendant Locale:en_US
Idle Timeout: 5000Enabled: yes Maximum number of sessions: 8cue1000#
What two pieces of
information can you derive from this output? (Choose two.)

A. The number of ports available is 16
B. The operator can bereachedat extension6800
C. The voicemail pilot point number is 6800
D. The voicemail application is enabled.
E. The idle timeout is 5 seconds

Answer: C,D

QUESTION 3
You work as an administrator at your company. You study the exhibit carefully. What type of calls
can the ephone with extension 2151 make?
Exhibit:

A. No impact on out going calls. However, in coming calls will not be permitted to extension
2151unless cor list is configured on the ephonedn
B. Only US calls
C. All calls
D. Internal and emergency calls only, because of the defaultcor restriction.
E. None

Answer: C

QUESTION 4
You work as an administrator at your company. You study the exhibit carefully. A user at Acme
Co. reports that when some one leaves a voicemail message, their MWI does not light up. The
administrator has checked the MWI configuration in Cisco Unified Communications Manager
Express and found that the MWI On number is 9001 and the MWI Off number is 9000. Using the
trace output from the Cisco Unity Express module, what is the problem?
Exhibit:

Answer: A

QUESTION 5
You work as an administrator at your company. You study the exhibits carefully. This proposed
configuration is meant to forward calls to extension 9999 when extension 2001is busy. Which
configuration command will most likely to be edited for this to function properly?
Exhibit #1:

Exhibit #2:

A. max registrations
B. id network mask
C. mailbox
D. voiceregisterpool

Answer: D

Best CCNA Training and CCNA Certification and more
Cisco exams log in to Certkingdom.com