Exam Number 300-375
Associated Certifications CCNP Wireless
Duration 90 Minutes (60 – 70 questions)
Available Languages English
This exam tests a candidate’s knowledge of implementing client device security, identity based authentication and services, along with securing and monitoring the Enterprise wireless infrastructure.
The 300-375 Securing Wireless Enterprise Networks (WISECURE) exam is a 90-minute, 60-70 question assessment that is associated with the CCNP Wireless certification. This exam tests a candidate’s knowledge of implementing client device security, identity based authentication and services, along with securing and monitoring the Enterprise wireless infrastructure. Candidates can prepare for this exam by taking the Securing Wireless Enterprise Networks (WISECURE) course.
The following topics are general guidelines for the content that is likely to be included on the exam. However, other related topics may also appear on any specific instance of the exam. To better reflect the contents of the exam and for clarity purposes, these guidelines may change at any time without notice.
1.0 Integrate Client Device Security 19%
1.1. Describe Extensible Authentication Protocol (EAP) authentication process
1.2. Configure client for secure EAP authentication
1.2.a. Native OS (iOS, Android, Windows, MAC OS, year 2013+) or AnyConnect client
1.3. Describe the impact of security configurations on application and client roaming
1.3.a. Key caching
1.3.b. 802.11r
1.4. Implement 802.11w Protected Management Frame (PMF) on the WLAN
1.4.a. Client support
1.4.b. PMF modes
1.4.c. Relevant timer settings
1.5. Implement Cisco Management Frame Protection (MFP)
1.5.a. Cisco Compatible Extensions (CCX)
1.5.b. Infrastructure mode
1.5.c. Client and infrastructure mode
1.6. Describe and configure client profiling
1.6.a. ISE
1.6.b. WLC
2.0 Implement Secure Distribution System Connectivity Services on the Wireless Infrastructure 24%
2.1. Describe the impact of BYOD on wireless security
2.1.a Additional security risks
2.1.b Loss of device control
2.1.c Increased complexity of policy enforcement
2.2. Implement BYOD policies
2.2.a. Single vs dual SSID
2.2.b.Self registration
2.2.c. mDNS sharing
2.2.d.Wi-Fi Direct
2.3. Implement AAA based Layer 3 security on the controller
2.3.a. Local Web Auth (LWA)
2.3.a.[i] External authentication)
2.3.a.[ii] Locally significant certificates
2.3.a.[iii] Pre-authentication ACL
2.3.a.[iv] Pass through configuration
2.4. Describe regulatory compliance considerations for protecting data and access and providing accountability
2.4.a. PCI
2.5. Utilize security audit tools for Distribution Systems
2.5.a. PI reports
2.5.b. PCI audit
3.0 Implement Secure Client Connectivity Services on the Wireless Infrastructure 27%
3.1. Implement 802.1x wireless client authentication
3.1.a. AireOS
3.1.a.[i] Local
3.1.a.[ii] Central
3.1.b. IOS-XE
3.1.c. Autonomous
3.1.c.[i] Local authentication
3.1.c.[ii] Remote authentication
3.1.d. FlexConnect
3.1.d.[i] Local authentication
3.1.d.[ii] Remote authentication
3.2. Implement Identity Based Networking (IBN)
3.2.a. AireOS
3.2.a.[i] VLANs
3.2.a.[ii] QoS
3.2.a.[iii] ACLs
3.2.b. IOS-XE
3.2.b.[i] VLANs
3.2.b.[ii] QoS
3.2.b.[iii] ACLs
3.2.c. Autonomous
3.2.c.[i] VLAN
3.2.d. FlexConnect
3.2.d.[i] VLAN
3.2.d.[ii] ACLs
3.2.d.[iii] QoS
3.3. Implement ISE AAA parameters for integration with the wireless network
3.3.a. Network device
3.3.b. IBN profile
3.4. Implement AAA based Layer 3 security using ISE
3.4.a. Utilizing ISE as AAA service
3.4.a.[i] Locally significant certificates on ISE
3.4.a.[ii] Using captive portal capabilities for guest access
3.4.b. Central Web Auth (CWA
3.4.b.[i] Returned values and overrides
3.4.b.[ii] Access accept
3.4.b.[iii] AAA override statement
3.5. Configure MSE based web authentication
3.6. Utilize security audit tools for client connectivity
3.6.a. PI reports
3.6.b. PCI audit
4.0 Implement Secure Management Access on the WLAN Infrastructure 14%
4.1. Controlling administrative access to the wireless infrastructure
4.1.a. RADIUS
4.1.b. TACACS
4.1.c. Controller and ISE integration
4.1.d. Access point administration credentials
4.2. Configure APs and switches for 802.1x access to the wired infrastructure
4.2.a. Controller based
4.2.b. Autonomous
4.3. Implement SNMPv3 on the wireless infrastructure
4.3.a. AireOS
4.3.b. IOS-XE
4.3.c. Autonomous
5.0 Monitoring Security on the WLAN Infrastructure 16%
5.1. Execute Security reports on PI
5.2. Perform Rogue Management
5.2.a. Rogue Containment on WLC and PI
5.2.b. RLDP on WLC and PI
5.2.c. SwitchPort tracing on PI
5.2.d. Location on PI
5.2.e. Rogue Rules on WLC and PI
5.3. Monitor rogue APs and clients
5.3.a. PI Maps
5.3.b. Controller
5.4. Monitor Alarms
5.4.a. 2 items
5.4.b. PI Security Tab
5.4.c. Controller Trap Logs
5.5. Identify RF related Security interferers on WLC and PI Maps
5.5.a. Jammers
5.5.b. Inverted Wi-Fi
5.5.c. Wi-Fi invalid channel
5.6. Implement wIPS
5.6.a. Enhanced Local Mode (ELM)
QUESTION 1
An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which option must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?
A. local EAP
B. authentication caching
C. pre-authentication
D. Cisco Centralized Key Management
Answer: A
QUESTION 2
When you configure BYOD access to the network, you face increased security risks and challenges. Which challenge is resolved by deploying digital client certificates?
A. managing the increase connected devices
B. ensuring wireless LAN performance and reliability
C. providing device choice and support
D. enforcing company usage policies
Answer: D
QUESTION 3
Which two events are possible outcomes of a successful RF jamming attack? (Choose two.)
A. unauthentication association
B. deauthentication multicast
C. deauthentication broadcast
D. disruption of WLAN services
E. physical damage to AP hardware
Answer: D,E
Click here to view complete Q&A of 300-375 exam
Certkingdom Review
Best Cisco 300-375 Certification, Cisco 300-375 Training at certkingdom.com